 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960057A * Designed for use with LSI Logic L64381 10Base-T PHY transceiver * Integrated resistor network for impedance matching * Low profile, surface mount package, rated for 225C peak IR reflow temperature * 2000 Vrms isolation ELECTRICALS AT 25C Part No. Insertion Loss (dB) Max 1-10MHz Attenuation (dB) Min 20MHz 25MHz 30MHz Return Loss (dB) Min 5MHz-10MHz Crosstalk (dB) Min 1MHz-10MHz CM-CM Rej (dB) Min 10-30MHz 30-100MHz S556-5999-29 -1.0 TX -7.0 RX -5.0 -18 -11 -28 -16 -15 -35 -40 -30 SCHEMATIC MECHANICAL Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel: 201-432-0463 * Fax: 201-432-9542 * E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960057A APPLICATION CIRCUIT APPLICATION NOTES * Bel's surface mount 10Base-T network component filter modules provide a complete solution for the interface module between the IC transceiver chip and the media side connector. Designed within each module are transmit and receive filter networks, high voltage isolation transformers and high performance EMI suppression common mode chokes. Each module fully meets the IEEE 802.3 standards for 10 Mbps data rates over 100 meters of media cable. * This Bel part type has been designed to provide signal performance optimization, maximum noise reduction and minimum crosstalk interference. Careful board layout and grounding techniques are also critical to control jitter and signal reflections. * Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each part is optically inspected to meet rigid coplanarity requirements. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 |
Price & Availability of S556-5999-29
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |